You are here: Main page» MARCH US Pump Assemblies» Series 7.5» TE-7.5K-MD-AM


For a larger view click on the thumbnail


Max Flow68 GPM 257 LPM
Max Head65 FT19.8 M
Power5 HP3.72 KW
Electrical/Air: 62PSI and 130CFM
Inlet: 2"MPT
Outlet: 1-1/2"MPT
  • Wet End: Natural Kynar (Front Housing, Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing)
  • Max Internal Pressure: 60 PSI / 4.1 bar
  • Max Liquid Temperature: 190 °F / 87°C
  • Note: Product image may be different than actual product received.

Part Numbers

0156-0120-0100, TE-7.5K-MD-AM


ItemPart NumberQtyDescription
40156-0023-100010.157” CS x 6.457” ID “O” Ring (Teflon Encapsulated Viton)
40156-0034-100010.157” CS x 6.457” ID “O” Ring (EPDM)
50156-0037-10002Front & Rear Thrust Washer (Silicon Carbide)
60156-0036-10001Shaft (Silicon Carbide)
60156-0043-10001Shaft, 3 Flats (Ceramic)
70156-0004-03001Impeller with Mica Teflon Bushings (Natural Kynar)
70156-0004-05001Impeller with Silicon Carbide Bushings (Natural Kynar)
70156-0004-06001Impeller with Ryton Bushings (Natural Kynar)
100156-0041-10001Motor Bracket (Plastic)
0750-1011-10001Stainless Steel Tag w/Customer's Desired Information (Not Shown)

Motor Information

0157-0152-1000 Motor
5HP/3.72kW, 62 PSI and 130 CFM, 1/2″BSP Air Connection

Please contact us for alternative motor data

Perfect for Applications Including

Applications for the TE-7.5K-MD-AM Magnetic Drive Pump include chemical recirculation, chemical transfer, bicarbonate systems, deionized water systems, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, ion exchange recovery, and aquariums.

Great for Chemicals Including

The TE-7.5K-MD-AM has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Hydrofluoric Acid, Hydrogen Peroxide, Nitric Acid, Phosphoric Acid, Potassium Chloride, Sodium Chloride, Sodium Hypochlorite, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The TE-7K-MD-AM may have been modified to handle these chemicals. This pump may have to be modified to pump specific gravities, viscosities, or elevated temperatures different then ambient water. Please contact March Pump to review your application before using the TE-7.5K-MD-AM. Chemical Resistance Chart

Summary Paragraph

March Pump’s industrial TE-7.5K-MD-AM is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 68 gallons per minute at 20 feet, and its maximum head is 65 Feet (28 PSI). The standard wet end (the materials that come into contact with the solution) is composed of Natural Kynar, Viton, Carbon, and Ceramic. The inlet connection is 2 inch female pipe thread, and the outlet is 1.5 inch male pipe thread. The standard motor is a Compressed Air Motor which may require 62 PSI and 130 CFM. The maximum internal pressure the pump can tolerate is 60 PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-7.5K-MD-AM centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March TE-7.5K-MD-AM is suitable for your application, please contact March Pump.


MARCH Pumpen GmbH & Co. KG
Rathenaustrasse 2, 35394 Gießen

 +49 (0) 641 / 68 68 06 – 0
 +49 (0) 641 / 68 68 06 – 60