You are here: Main page» Magnetic Drive Rotary Vane Pumps» Rotary vane pumps VANE-MAG® MP series» Rotary Vane Pump VANE-MAG® MP 214

Rotary Vane Pump VANE-MAG® MP 214

Rotary Vane Pump VANE-MAG® MP 214
Rotary Vane Pump VANE-MAG® MP 214

For a larger view click on the thumbnail


Technical data MP214 (768.93 KB)

Horizontal, self-priming, magnetic drive rotary sliding vane pump in block design, 
wetted pump components made of completely non-metallic materials for aggressive liquids, also compliant with ATEX 2014/34/EU or FDA.

MARCH VANE-MAG® MP series pumps are rotary positive displacement pumps, magnetically driven and made of non-metallic materials. Characteristic wise, rotary sliding vane pumps generate low volumetric flows with middle to high discharge pressures and almost no pulsation. The operating principle is based on radial sliding vanes, which are rotating in an eccentric stator. The pump housing is made of corrosion resistant solid block plastics like PP or PVDF. The motor power is transmitted by a force-locked connection to the hydraulic part of the pumps by strong Neodynium-Permanent-Magnets. This allows the pump to work without any shaft seals, which guarantees a save and maintenance-free transfer of the liquid without any leakage of corrosive, toxic and explosive fluids. Pumps for hazardous explosive areas, zone 1 or 2 can be made out of conductive PVDF.


  • Rotating positive displacement pump
  • Sliding Vane Pump
  • Corrosion resistant du to non-metallic materials
  • Magnetically coupled
  • Leak-Free
  • Rugged
  • Wet self-priming
  • Compact block design
  • Almost no pulsation
  • Middle to high discharge pressure
  • Low capacity flow rates
  • Metering capable


Performance data

Nominal flow rate:200 l/h
Differential pressure:max. 5 bar


PP:max. 65°C
PVDF:max. 65°C
PEEK:max. 65°C

Available materials

Stator, Vanes:Carbon graphite
Bearings:Carbon graphite, SiC

System pressure

PP:max. 6 bar
PVDF:max. 10 bar

Connection on suction side 

Thread 3/8“ IG
Loose-type flange DN 15

Connection on discharge side 

Thread 3/8" IG
Loose-type flange DN 15


IEC three-phase asynchronous motor
3x230 / 400V
0,37 kW / 1450 1/min