You are here: Main page» Magnetic Driven Gear Pumps» March Master Gear series» MARCH MASTER GEAR

MARCH MASTER GEAR

MARCH MASTER GEAR
MARCH MASTER GEAR

For a larger view click on the thumbnail

 

Technical data MARCH MASTER GEAR (3.87 MB)

Horizontal, self-priming, single-stage, magnetic driven rotary positive displacement pump in close-coupled design made of stainless steel.

MARCH MASTER GEAR series magnetic driven gear pumps are gear pumps in monoblock design with magnetic drive and operate completely without mechanical shaft sealing. Power is transmitted to the hydraulic section by strong NdFeB permanent magnets without contact. MARCH - Magnetically coupled gear pumps comply with the highest standards of quality, economy and reliability when conveying a wide variety of liquids.
 

Features

  • Rotating positive displacement pump
  • External gear pump
  • Straight and helical gears
  • Leak-Free
  • Magnetically coupled, Sealless
  • Maintenance-Free
  • Self-priming (wet)
  • Close-coupled
  • For fluids without solids
  • Self-lubricating PEEK gears and bearings even for low viscosity fluids
  • 24V BLDC Motor
  • Integrated control electronics
  • 10V control voltage
  • Speed range 1000 ... 4000 1/min

 

Technical data

Flow rate:max 300 l/h
Differential pressure:max. 8 bar
System pressure:PN20 bar
NPSHR:2,0 + 0,5 m
Geo. th. displacement volume:1,76 cm3/U

Available materials

Housing:Stainless steel 1.4404, EN-GJS-400-15
O-Ring:EPDM, FKM, NBR, FFKM, PTFE
Shaft:Oxide ceramic, 1.4404, 1.7131
Gears:PEEK, 1.7131
Bearings:PEEK, bronze

Connection on suction side

1/4" Thread NPT, BSP

Connection on discharge side

1/4" Thread NPT, BSP

Motor

24 V BLDC Motor
10 V Control voltage
Protection class IP54