You are here: Main page» Magnetic Driven Rotary Sliding Vane Pumps» VANE-MAG® MPA series» VANE-MAG® MPA 314 (I° Range)

VANE-MAG® MPA 314 (I° Range)

VANE-MAG® MPA 314 (I° Range)
VANE-MAG® MPA 314 (I° Range)

For a larger view click on the thumbnail

 

Technical data MPA114-514 (1.16 MB)

Horizontal, self-priming, single-stage, magnetic driven rotary positive displacement pump in close-coupled design made of stainless steel also according to ATEX 2014/34/EU.

MARCH VANE-MAG® MPA series pumps are rotary positive displacement pumps, magnetically driven and made of stainless steel AISI316Ti. Characteristic wise, rotary sliding vane pumps generate low volumetric flows with middle to high discharge pressures and approximately no pulsation. The operating principle is based on radial sliding vanes, which are rotating in an eccentric stator. The pump housings are machined of solid block materials. The motor power is transmitted by a frictional connection to the hydraulic part of the pumps by strong Neodynium-Permanent-Magnets. The pump is able to work without any shaft seals, which guarantees a save and maintenance-free transfer of the liquid without any leakage of corrosive, toxic and explosive fluids. Pumps for hazardous explosive areas zone 1 or 2 are available upon request.
 

Features

  • Rotating positive displacement pump
  • Sliding Vane Pump
  • Metallic housing materials
  • Magnetically coupled
  • Leak-Free
  • Rugged
  • Wet self-priming
  • Dry running capable
  • Compact block design
  • Approximately no pulsation
  • Middle to high discharge pressure
  • Low capacity flow rates
  • Metering capable

 

Performance data

Nominal flow rate:300 l/h
Differential pressure:max. 13 bar

Temperatures

1.4571:max. 120°C

Available materials

Housing:1.4571
O-Ring:EPDM, FKM, FFKM, FEP
Rotor:1.4571
Stator, Vanes:Carbon graphite
Bearings:Carbon graphite, SiC

System pressure

1.4571:max. 16 bar
Ti Gr.5max. 100 bar

Connection on suction side

Thread 3/8“ IG
Loose-type flange DN 15

Connection on discharge side

Thread 3/8" IG
Loose-type flange DN 15

Motor

IEC three-phase asynchronous motor
3x230 / 400 V
0,37 kW / 1450 1/min