Rotary vane pumps VANE-MAG® MP series
MAGNETICALLY DRIVEN ROTARY SLIDING VANE PUMPS
MARCH VANE-MAG® MP series pumps are rotary positive displacement pumps, magnetically driven and made of non-metallic materials. Characteristic wise, rotary vane pumps generate low volumetric flows with middle to high discharge pressures and almost no pulsation. The operating principle is based on radial sliding vanes, which are rotating in an eccentric stator bore hole. The pump housing is made of corrosion resistant solid block plastics like PP or PVDF. The motor power is transmitted by a force-locked connection to the hydraulic part of the pumps by strong Neodynium-Permanent-Magnets. This allows the pump to work without any shaft seals, which guarantees a save and maintenance-free transfer of the liquid without any leakage of corrosive, toxic and explosive fluids. Pumps for hazardous explosive areas, zone 1 or 2 can be made out of conductive PVDF.
Features
- Rotating positive displacement pump
- Non-metallic materials
- Almost pulsation-free
- Leak-free
- Magnetically driven
- Low capacity flow rates
- High discharge pressure
- Wet self-priming
- Constant control behaviour
- Integrated frequency converter available
- Pump for ATEX 2014/34/EU
Applications
The VANE-MAG® rotary sliding vane pumps have proven their performance in every application that requires lower flow rates at high discharge pressure, when corrosive liquids must be metered.
Typical Applications:
- Biodiesel facilitys
- Laboratory equipment
- Pressure boosting
- Dosing of chemical liquids
- Plant Engineering
- Equipment Engineering
- Pharmaceutical-, Medical-, Bio- Engineering
Technical data
Nominal speed: | 1450 1/min |
Nominal flow rate: | |
MP 114 | 100 l/h |
MP 214 | 200 l/h |
MP 314 | 300 l/h |
MP 414 | 400 l/h |
MP 514 | 500 l/h |
MP 614 | 600 l/h |
MP 814 | 800 l/h |
MP 1014 | 1000 l/h |
Differential pressure: | |
MP 114 - 514 | max. 5 bar |
MP 614 - 1014 | max. 10 bar |
System pressure: | PP max. 5 bar |
PVDF max. 10 bar | |
Temperature: | max. 65 °C |
Density: | max. 1,9 kg/dm³ |
Viscosity: | max. 5000 cP |
Connections
MP 114 - 514 | MP 614 - 1014 | |
Thread: | 2x G 3/8" IG | 2x G 3/4" IG |
Flange: | 2x DN 15 | 2x DN 20 |
Materials
Housing: | PP, PVDF, PVDF-EL, PEEK, PVC, PE |
O-Ring: | EPDM, FKM, FFKM |
Rotor: | PVDF-CFR, PEEK-CFR |
Stator, Vanes: | Carbon graphite |
Bearing: | Carbon graphite, SiC |
Rotary Vane Pump VANE-MAG® MP 114
Nominal flow rate: | 100 l/h |
Differential pressure: | max. 5 bar |
Materials: | PP, PVDF, PVDF-EL, PVC, PEEK, PE |
Temperature: | max. 65 °C |
Drive: | 3x230/400 V, 0,37 kW, 1450 1/min |
Rotary Vane Pump VANE-MAG® MP 214
Nominal flow rate: | 200 l/h |
Differential pressure: | max. 5 bar |
Materials: | PP, PVDF, PVDF-EL, PVC, PEEK, PE |
Temperature: | max. 65 °C |
Drive: | 3x230/400 V, 0,37 kW, 1450 1/min |
Rotary Vane Pump VANE-MAG® MP 314
Nominal flow rate: | 300 l/h |
Differential pressure: | max. 5 bar |
Materials: | PP, PVDF, PVDF-EL, PVC, PEEK, PE |
Temperature: | max. 65 °C |
Drive: | 3x230/400 V, 0,37 kW, 1450 1/min |
Rotary Vane Pump VANE-MAG® MP 414
Nominal flow rate: | 400 l/h |
Differential pressure: | max. 5 bar |
Materials: | PP, PVDF, PVDF-EL, PVC, PEEK, PE |
Temperature: | max. 65 °C |
Drive: | 3x230/400 V, 0,37 kW, 1450 1/min |
Rotary Vane Pump VANE-MAG® MP 514
Nominal flow rate: | 500 l/h |
Differential pressure: | max. 5 bar |
Materials: | PP, PVDF, PVDF-EL, PVC, PEEK, PE |
Temperature: | max. 65 °C |
Drive: | 3x230/400 V, 0,37 kW, 1450 1/min |
Rotary Vane Pump VANE-MAG® MP 614
Nominal flow rate: | 600 l/h |
Differential pressure: | max.10 bar |
Materials: | PP, PVDF, PVDF-EL, PVC, PEEK, PE |
Temperature: | max. 65 °C |
Drive: | 3x230/400 V, 0,55-0,75 kW, 1450 1/min |
Rotary Vane Pump VANE-MAG® MP 814
Nominal flow rate: | 800 l/h |
Differential pressure: | max. 10 bar |
Materials: | PP, PVDF, PVDF-EL, PVC, PEEK, PE |
Temperature: | max. 65 °C |
Drive: | 3x230/400 V, 0,55-0,75 kW, 1450 1/min |
Rotary Vane Pump VANE-MAG® MP 1014
Nominal flow rate: | 1000 l/h |
Differential pressure: | max. 10 bar |
Materials: | PP, PVDF, PVDF-EL, PVC, PEEK, PE |
Temperature: | max. 65 °C |
Drive: | 3x230/400 V, 0,55-0,75 kW, 1450 1/min |