You are here: Main page» Magnetic Driven Rotary Sliding Vane Pumps» VANE-MAG® MP series

VANE-MAG® MP series

VANE-MAG® MP series

MAGNETICALLY DRIVEN ROTARY SLIDING VANE PUMPS

Product description

MARCH VANE-MAG® MP series pumps are rotary positive displacement pumps, magnetically driven and made of non-metallic materials. Characteristic wise, rotary sliding vane pumps generate low volumetric flows with middle to high discharge pressures and approximately no pulsation. The operating principle is based on radial sliding vanes, which are rotating in an eccentric stator. The pump housing is made of corrosion resistant solid block plastics like PP or PVDF. The motor power is transmitted by a frictional connection to the hydraulic part of the pumps by strong Neodynium-Permanent-Magnets. This allows the pump to work without any shaft seals, which guarantees a save and maintenance-free transfer of the liquid without any leakage of corrosive, toxic and explosive fluids. Pumps for hazardous explosive areas, zone 1 or 2 can be made out of conductive PVDF.

Features

  • Rotating positive displacement pump
  • Non-metallic materials
  • Almost pulsation-free
  • Leak-free
  • Magnetically driven
  • Low capacity flow rates
  • High discharge pressure
  • Wet self-priming
  • Constant control behaviour
  • Integrated frequency converter available
  • Pump for ATEX 2014/34/EU

Applications

The VANE-MAG® rotary sliding vane pumps have proven their performance in every application that requires lower flow rates at high discharge pressure, when corrosive liquids must be metered.

Typical Applications:

  • Biodiesel facilitys
  • Laboratory equipment
  • Pressure boosting
  • Dosing of chemical liquids
  • Plant Engineering
  • Equipment Engineering
  • Pharmaceutical-, Medical-, Bio- Engineering

Technical data

Nominal speed:1450 1/min
Nominal flow rate:
MP 114100 l/h
MP 214200 l/h
MP 314300 l/h
MP 414400 l/h
MP 514500 l/h
MP 614600 l/h
MP 814800 l/h
MP 10141000 l/h
Differential pressure:
MP 114 - 514max. 5 bar
MP 614 - 1014max. 10 bar
System pressure:PP max. 5 bar
 PVDF max. 10 bar
Temperature:max. 65 °C
Density:max. 1,9 kg/dm³
Viscosity:max. 5000 cP

    Connections

     MP 114 - 514MP 614 - 1014
    Thread:2x G 3/8" IG2x G 3/4" IG
    Flange:2x DN 152x DN 20

    Materials

    Housing:PP, PVDF, PVDF-EL, PEEK, PVC, PE
    O-Ring:EPDM, FKM, FFKM
    Rotor:PVDF-CFR, PEEK-CFR
    Stator, Vanes:Carbon graphite
    Bearing:Carbon graphite, SiC
    Show 1 to 8 (of in total 8 products)
    • Sites:
    • 1

     

    VANE-MAG® MP 114

    Nominal flow rate:100 l/h
    Differential pressure:max. 5 bar
    Materials:PP, PVDF, PVDF-EL, PVC, PEEK, PE
    Temperature:max. 65 °C
    Drive:3x230/400 V, 0,37 kW, 1450 1/min

    VANE-MAG® MP 214

    Nominal flow rate:200 l/h
    Differential pressure:max. 5 bar
    Materials:PP, PVDF, PVDF-EL, PVC, PEEK, PE
    Temperature:max. 65 °C
    Drive:3x230/400 V, 0,37 kW, 1450 1/min

    VANE-MAG® MP 314

    Nominal flow rate:300 l/h
    Differential pressure:max. 5 bar
    Materials:PP, PVDF, PVDF-EL, PVC, PEEK, PE
    Temperature:max. 65 °C
    Drive:3x230/400 V, 0,37 kW, 1450 1/min

    VANE-MAG® MP 414

    Nominal flow rate:400 l/h
    Differential pressure:max. 5 bar
    Materials:PP, PVDF, PVDF-EL, PVC, PEEK, PE
    Temperature:max. 65 °C
    Drive:3x230/400 V, 0,37 kW, 1450 1/min

    VANE-MAG® MP 514

    Nominal flow rate:500 l/h
    Differential pressure:max. 5 bar
    Materials:PP, PVDF, PVDF-EL, PVC, PEEK, PE
    Temperature:max. 65 °C
    Drive:3x230/400 V, 0,37 kW, 1450 1/min

    VANE-MAG® MP 614

    Nominal flow rate:600 l/h
    Differential pressure:max.10 bar
    Materials:PP, PVDF, PVDF-EL, PVC, PEEK, PE
    Temperature:max. 65 °C
    Drive:3x230/400 V, 0,55-0,75 kW, 1450 1/min

    VANE-MAG® MP 814

    Nominal flow rate:800 l/h
    Differential pressure:max. 10 bar
    Materials:PP, PVDF, PVDF-EL, PVC, PEEK, PE
    Temperature:max. 65 °C
    Drive:3x230/400 V, 0,55-0,75 kW, 1450 1/min

    VANE-MAG® MP 1014

    Nominal flow rate:1000 l/h
    Differential pressure:max. 10 bar
    Materials:PP, PVDF, PVDF-EL, PVC, PEEK, PE
    Temperature:max. 65 °C
    Drive:3x230/400 V, 0,55-0,75 kW, 1450 1/min
    Show 1 to 8 (of in total 8 products)
    • Sites:
    • 1