You are here: Main page» Air Operated Cylinder Diaphragm Pumps» CODIP series

CODIP series

CODIP series
CODIP series

For a larger view click on the thumbnail

 

Product information CODIP (4.04 MB)

AIR OPERATED CYLINDER DIAPHRAGM PUMPS

Variable speed, air operated, dry-self-priming, dry-running resistant and solid handling*1 tubular diaphragm pump, wetted parts made entirely of PTFE.

The CODIP air operated cylinder diaphragm pump is an oscillating positive displacement pump in which the fluid is housed in a double cylinder jacket for optimum safety. The pumped medium is surrounded by a jacketed inner fluid. This results in smooth delivery and distribution of forces over the entire cylinder jacket for optimum service life even under difficult operating conditions. It is possible to operate the pump with nitrogen as the drive medium. This requires a completely closed and isolated environment with sufficient ventilation at the pump installation site.
CODIP cylindrical diaphragm pumps have been developed to cope with difficult pumping tasks with aggressive abrasive and explosive chemicals. Viscosities up to 25,000 mPas, maximum medium temperatures up to 180 °C, maximum discharge pressures up to 10 bar (150 psi) allow a wide range of applications ensuring safe pumping of environmentally hazardous, toxic and health-endangering liquids under maximum safety conditions.

Features

  • Leak-free
  • Self-priming
  • Reliable pumping of solids
  • Dry-running safe
  • Momentum exchange by inert liquid 
  • Low mechanical stress of the diaphragm
  • ATEX version available

 

*1 Different limitations for different series upon request

Functional description

An independent automatic air distributor (F) supplies air pressure to one side of a flat rubber diaphragm (D). An inert liquid (E) transmits this pressure uniformly to the tubular diaphragm (B) which leads to closing of the suction side ball valve (C). At the same time the pressure side ball valve (C) opens and medium is conveyed into the pressure line. In the suction cycle the diaphragm (D) automatically returns to its initial position, a vacuum is created and the cylinder diaphragm (B) relaxes. The ball valve (C) on the pressure side closes, the ball valve (C) on the suction side opens and medium flows into the cylinders.

Technical data

CODIP
series
DNS/D
[Zoll BSP]
Qmax
[m3/h]
ΔPmin
[bar]
ΔPmax
[bar]
Air consumption
max [m3/min]
Material
RP 201"1,32 100,21non-metallic
RP 602"5,88 100,65non-metallic
RP 60 DX2"10,68 101,28non-metallic
RP 1503"10,8 101,62non-metallic
RP 150 DX3"21 103,2non-metallic

 

Discharge pressure:max. 10 bar
System pressure:max. 10 bar
Temperature:-20°C up to +180°C
Solids:7 mm, 50% vol.
 

Connection

Flange:According to DIN EN 1092-1
 

Medium-affected materials

Cylinder diaphragm:PTFE, FKM, EPDM, Neoprene, Hypalon
Valve ball, seats:PTFE, FKM, EPDM, Neoprene, Hypalon

Applications

  • Disposal of unknown / undefinable chemicals
  • Sampling
  • Viscous, abrasive, corrosive liquids 
  • Environmentally and health hazardous liquids
  • Acids, alkalis, solvents, liquefied gases
  • Ultrapure mediums in the pharmaceutical industry