Sie sind hier: Startseite» MARCH US Pump Assemblies» Series 2» LC-2CP-MD Mag Drive Pump

LC-2CP-MD Mag Drive Pump

LC-2CP-MD Mag Drive Pump
Für eine größere Ansicht klicken Sie auf das Vorschaubild

 

March Pump’s industrial LC-2CP-MD is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 5 gallons per minute at 1 foot, and its maximum head is 13 Feet (5.5PSI). The LC-2CP-MD pump may be used submerged or not submerged. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Buna N, Stainless Steel, Ceramic, and Ceramic Magnet.

Unit60Hz
SystemUSMetric
Max Flow5 GPM 18.9 LPM
Max Head13 FT4 M
Power0.02 HP0.015 KW
Unit50Hz
SystemUSMetric
Max Flow4.9 GPM18.5 LPM
Max Head8.9 FT2.7 M
Power0.018 HP0.014 KW
Electrical/Air: 115V 50/60Hz or 230V 50/60Hz
Inlet: 3/8"FPT & 3/4"MPT
Outlet: 1/4"MPT
Submersible: Yes
  • Wet End: Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), 316 Stainless Steel (Shaft, Cooling Tube), Buna N (Cooling Tube Seal), Ceramic (Thrust Washer), Ceramic Magnet
  • Uses: Submersible or Open Air
  • When submerged, the following is also in contact with the solution: Epoxy, Buna N, Cord
  • Max Internal Pressure: 25 PSI / 1.7 bar
  • Max Internal Temperature: 130 °F / 54 °C
  • Note: Product image may be different than actual product received.

Part Numbers

P/NPump DescriptionModified With
0125-0057-0200LC-2CP-MD 115VStandard
0125-0057-0300LC-2CP-MD 230VStandard
The below are modified LC-2CP-MD's

Parts Breakdown

Parts Image
ItemPart NumberQtyDescription
0125-0057-02001LC-2CP-MD, 1 Phase, 115V, Complete Standard Pump
0125-0057-03001LC-2CP-MD, 1 Phase, 230V, Complete Standard Pump
10115-0062-10006#7-19 x 1-7/16" Long Self-Tapping Screw (Stainless)
20125-0056-10001Cover with 3/8" FPT x 3/4" MPT Inlet (Polypropylene)
30125-0065-100013/32" CS x 2-3/16" OD "O" Ring (Viton)
40130-0028-10001Thrust Washer (Ceramic)
50125-0125-10001Shaft (Stainless)
60125-0055-01001Impeller with Bare Ceramic Magnet (Polypropylene)
70125-0057-01001Rear Housing & Plug with 1/4" MPT Outlet (Polypropylene)
80125-0121-100011/16" CS x 2-3/8" OD Bracket “O” Ring (Viton)
90125-0007-10002Cooling Tube Seal (Buna N)
100125-0130-10004#8-18 x 1/2" Long Self-Tapping Screw (Stainless)
110125-0060-10001Mounting Base (Polypropylene)
120125-0110-10001Motor Bracket Plug (Polypropylene)
130210-0008-100011/16" CS x 7/16" OD "O" Ring (Viton)
14Not AvailableN/AL.C. Epoxy Motor Assembly
WEK0125-0115-02001Wet End Kit (Items: 1, 2, 3, 4, 5, 6, 7, 8, 9)

Options

Options Image
ItemPart NumberQtyDescription
30125-0066-100013/32" CS x 2-3/16" OD "O" Ring (Buna N)
40125-0061-10001Shaft (Ceramic)
60125-0087-02001Encapsulated Impeller (Polypropylene)
110125-0113-01001Marine Base (Not Shown) (Polypropylene & Grommets)
0750-1011-10001Stainless Steel Tag w/Customer's Desired Information (Not Shown)

Motor Information

115V Motor
6 Foot Cord and Plug, Submersible
60Hz: 1Ph 0.2HP/0.015kW, 0.92 AMPS, 3450RPM
50Hz: 1Ph 0.18HP/0.014kW, 1.1 AMPS, 2850RPM

230V Motor
6 Foot Cord, Submersible
60Hz: 1Ph 0.025HP/0.019kW, 0.53 AMPS, 3450RPM
50Hz: 1Ph 0.18HP/0.014kW, 0.72 AMPS, 2850RPM

Please contact us for alternative motor data

Perfect for Applications Including

The most common application for the LC-2CP-MD Magnetic Drive Pump is for marine air conditioning and fountains.

Great for Chemicals Including

The LC-2CP-MD has pumped Fresh Water and Salt Water. The LC-2CP-MD may have been modified to handle these chemicals. This pump may have to be modified to pump specific gravities, viscosities, or elevated temperatures different then ambient water. Please contact March Pump to review your application before using the LC-2CP-MD. Chemical Resistance Chart

Summary Paragraph

March Pump’s industrial LC-2CP-MD is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 5 gallons per minute at 1 foot, and its maximum head is 13 Feet (5.5PSI). The LC-2CP-MD pump may be used submerged or not submerged. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Buna N, Stainless Steel, Ceramic, and Ceramic Magnet. When submerged, Epoxy, Buna N, and the Cord are also in contact with the solution. The inlet connection is 3/8 inch female pipe thread and 3/4 inch male pipe thread, and the outlet is 1/4 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.02 Horsepower motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 25PSI, and the maximum liquid temperature is 130 Fahrenheit or 54 Celsius. The March LC-2CP-MD centrifugal magnetic drive pump is capable of handling fresh water, salt water, and mild chemicals. To determine if the March LC-2CP-MD is suitable for your application, please contact March Pump.


 


MARCH Pumpen GmbH & Co. KG
Rathenaustrasse 2, 35394 Gießen

 +49 (0) 641 / 68 68 06 – 0
 +49 (0) 641 / 68 68 06 – 60
 info(at)march-pumpen.com