You are here: Main page» MARCH US Pump Assemblies» Series 10» TE-10K-MD with Flanges Magnetic Drive Pump

TE-10K-MD with Flanges Magnetic Drive Pump

TE-10K-MD with Flanges Magnetic Drive Pump
For a larger view click on the thumbnail

 

March Pump’s industrial TE-10K-MD with Flanges is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 200 gallons per minute at 70 feet, and its maximum head is 160 Feet (70PSI).

Unit60Hz
SystemUSMetric
Max Flow200 GPM 757 LPM
Max Head160 FT48.7 M
Power10 HP7.6 KW
Unit50Hz
SystemUSMetric
Max Flow172 GPM654 LPM
Max Head112 FT34.1 M
Power10 HP7.6 KW
Electrical/Air: 3Ph 230/460V 60Hz & 380V 50Hz, or 3Ph 575V 60Hz
Inlet: 3" Class ANSI Class 150 Flange
Outlet: 2" Class ANSI Class 150 Flange
  • Wet End: Natural Kynar (Front Housing, Rear Housing), Glass Filled Kynar (Impeller), Viton (Gasket), Carbon (Bushing), Ceramic (Shaft, Thrust Washers)
  • Additional Motor Options: Available in 10HP Explosion Proof, 575V, and Washdown
  • Max Internal Pressure: 75 PSI / 5.2 bar
  • Max Liquid Temperature: 190 °F / 87 °C
  • Note: Product image may be different than actual product received.

Part Numbers

P/NPump DescriptionModified With
0161-0016-0170TE-10K-MD 3 Phase 10 HP with FlangesStandard
The below are modified TE-10K-MD's with Flanges

Parts Breakdown

Parts Image
ItemPart NumberQtyDescription
0161-0016-01701TE-10K-MD, 3 Phase, Complete Standard Pump with Flanges
10160-0029-100095/16”-18 x 1-3/4” Long Screw (Stainless)
20160-0030-100095/16” ID x 5/8” OD Washer (Stainless)
30161-0033-01001Pump Housing with Flanges (Kynar)
40161-0043-100019.750” ID x 10” OD Gasket (Viton)
50161-0001-10002Front & Rear Thrust Washer (Ceramic)
60161-0002-10001Shaft (Ceramic)
70161-0005-04001Impeller w/Carbon Bushings (Kynar)
80161-0009-10001Rear Housing (Kynar)
90161-0031-01001Drive Magnet
100161-0007-00101Motor Bracket (Metal)
110160-0031-100041/2"-13 x 1" Long Screw (Stainless)
120161-0012-10001Motor, TEFC, 3 Phase, 230/460 V, 50/60 Hz, 10 HP

Options

Options Image
ItemPart NumberQtyDescription
40161-0047-100019.750” ID x 10” OD Gasket (EPDM)
40161-0059-100019.750” ID x 10” OD Gasket (Teflon Encapsulated Viton)
50161-0034-10002Front & Rear Thrust Washer (Silicon Carbide)
60161-0039-10001Shaft, 3 Flats (Ceramic)
60161-0046-10001Shaft (Silicon Carbide)
70161-0005-06001Impeller with Mica Teflon Bushings (Kynar)
70161-0005-07001Impeller w/Silicon Carbide Bushings (Glass Filled Kynar)
0750-1011-10001Stainless Steel Tag w/Customer's Desired Information (Not Shown)

Motor Information

0161-0012-1000 Motor
Conduit Box, TEFC, IP55, VFD Capable
60Hz: 3Ph 10HP/ 7.4kW, 230/460V, 23.2/11.6 AMPS, 3450 RPM (Usable at 208V)
50Hz: 3Ph 10HP/ 7.4kW, 380V, 14.1 AMPS, 2850 RPM (Usable at 190/220V)

Please contact us for alternative motor data

Perfect for Applications Including

Applications for the TE-10K-MD with Flanges Magnetic Drive Pump include chemical recirculation, chemical transfer, deionized water systems, scrubber systems, detergent mixers, computer cooling, waste treatment plants, and plating operations.

Great for Chemicals Including

The TE-10K-MD with Flanges has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Hydrofluoric Acid, Hydrogen Peroxide, Nitric Acid, Phosphoric Acid, Potassium Chloride, Sodium Chloride, Sodium Hypochlorite, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The TE-10K-MD with Flanges may have been modified to handle these chemicals. This pump may have to be modified to pump specific gravities, viscosities, or elevated temperatures different then ambient water. Please contact March Pump to review your application before using the TE-10K-MD with Flanges. Chemical Resistance Chart

Summary Paragraph

March Pump’s industrial TE-10K-MD with Flanges is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 200 gallons per minute at 70 feet, and its maximum head is 160 Feet (70PSI). The standard wet end (the materials that come into contact with the solution) is composed of natural Kynar (PVDF), carbon filled Kynar (PVDF), Viton, Carbon, and Ceramic. The inlet connection is 3 inch ANSI class 150 flange, and the outlet is 2 inch ANSI class 150 flange. The standard motor is a 3 Phase 10 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 75PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-10K-MD with Flanges centrifugal magnetic drive pump is capable of handling mildly, or highly corrosive chemicals, acids, and solvents. To determine if the March TE-10K-MD with Flanges is suitable for your application, please contact March Pump.


 


MARCH Pumpen GmbH & Co. KG
Rathenaustrasse 2, 35394 Gießen

 +49 (0) 641 / 68 68 06 – 0
 +49 (0) 641 / 68 68 06 – 60
 info(at)march-pumpen.com