You are here: Main page» MARCH US Pump Assemblies» Series 7.5» TE-7.5K-MD with Flanges Magnetic Drive Pump

TE-7.5K-MD with Flanges Magnetic Drive Pump

TE-7.5K-MD with Flanges Magnetic Drive Pump
For a larger view click on the thumbnail

 

March Pump’s industrial TE-7.5K-MD with Flanges is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and deionized water systems. It is capable of generating a maximum flow of 82 gallons per minute at 40 feet, and its maximum head is 85 Feet (37PSI).

Unit60Hz 
SystemUSMetric
Max Flow82 GPM310 LPM
Max Head85 FT26 M
Power2 HP1.49 KW
 
Unit50Hz 
SystemUSMetric
Max Flow71 GPM268 LPM
Max Head59 FT18 M
Power1.5 HP1.118 KW
 
Electrical/Air: 1Ph 115/208/230V 60Hz & 100/200V 50Hz or 3Ph 208/230/460V 60Hz & 190/380V 50Hz, or 3Ph 575V 60Hz
Inlet: 2" ANSI Class 150 Flange
Outlet: 1.5" ANSI Class 150 Flange
  • Wet End: Natural Kynar (Front Housing, Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing)
  • Motor Options: Available in Explosion Proof and 575V Motor
  • Note: Product image may be different than actual product received.

Part Numbers

0156-0001-0270, TE-7.5K-MD 1 Phase 2HP with Flanges and Metal Motor Bracket
0156-0113-0100, TE-7.5K-MD 3 Phase 2HP, Weg Motor, with Flanges and Metal Motor Bracket
0156-0114-0100, TE-7.5K-MD 3 Phase 2HP, Weg Motor, with Flanges and Plastic Motor Bracket

Parts Breakdown

Parts Image
 
ItemPart NumberQtyDescription
 0156-0001-02701TE-7.5K-MD with Flanges, 1 Phase, Complete Standard Pump
 0156-0113-01001TE-7.5K-MD with Flanges, 3 Phase, Weg Motor, AL Bracket Complete Standard Pump
 0156-0114-01001TE-7.5K-MD with Flanges, 3 Phase, Weg Motor, PL Bracket Complete Standard Pump
10153-0011-100081/4"-20 x 1-1/2" Long Screw (Stainless)
20157-0023-100081/4" ID x 5/8" OD Washer (Stainless)
30156-0029-01001Front Housing with Flanges (Natural Kynar)
40156-0010-100010.157” CS x 6.457” ID “O” Ring (Viton)
50156-0016-10002Front & Rear Thrust Washer (Ceramic)
60156-0007-100014.500" Long Shaft (Ceramic)
70156-0004-02001Impeller with Carbon Bushings (Natural Kynar)
80156-0002-10001Rear Housing (Natural Kynar)
90156-0009-01001Drive Magnet
100156-0073-00101Motor Bracket (Aluminum)
110156-0053-100081/4"-20 Hex Nut (Stainless)
120155-0017-100043/8"-16 x 1" Long Screw (Stainless)
130155-0019-100043/8" ID x 5/8" OD Washer (Stainless)
140156-0110-10001Motor, TEFC, 3 Phase, 230/460 V, 50/60 Hz, 2 HP
150156-0022-10001Motor, TEFC, 1 Phase, 115/230 V, 50/60 Hz, 2 HP
WEK0156-0031-01001Wet End Kit (Items: 1, 2, 3, 4, 5, 6, 7, 8)

Options

Options Image
 
ItemPart NumberQtyDescription
40156-0023-100010.157" CS x 6.457" ID "O" Ring (Teflon Encapsulated Viton)
40156-0034-100010.157” CS x 6.457” ID “O” Ring (EPDM)
70156-0004-03001Impeller with Mica Teflon Bushings (Natural Kynar)
 0750-1011-10001Stainless Steel Tag w/Customer's Desired Information (Not Shown)

Motor Information

0156-0022-1000 Motor (Marathon)
Conduit Box, TEFC, IP43
60Hz: 1Ph 2HP / 1.5 kW, 115 / 230V, 22 / 11 AMPS, 3450RPM (Usable at 208V)
50Hz: 1Ph 1.5HP / 1.1 kW, 100 / 200V, 20 / 10 AMPS, 2850RPM

0156-0110-1000 Motor (Weg)
Conduit Box, TEFC, IP55, VFD Capable
60Hz: 3Ph 2 HP / 1.5 kW, 230/460V, 4.94 /2.47 AMPS, 3450 RPM (Usable at 208V)
50Hz: 3Ph 2 HP / 1.5 kW, 190/ 380V, 5.94 / 2.97 AMPS, 2850 RPM (Usable at 190-220 / 380-415V)

Please contact us for alternative motor data

Perfect for Applications Including

Applications for the TE-7.5K-MD with Flanges Magnetic Drive Pump include chemical recirculation, chemical transfer, microchip manufacturing, deionized water systems, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.

Great for Chemicals Including

The TE-7.5K-MD with Flanges has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Hydrofluoric Acid, Hydrogen Peroxide, Nitric Acid, Phosphoric Acid, Potassium Chloride, Sodium Chloride, Sodium Hypochlorite, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The TE-7.5K-MD with Flanges may have been modified to handle these chemicals. This pump may have to be modified to pump specific gravities, viscosities, or elevated temperatures different then ambient water. Please contact March Pump to review your application before using the TE-7.5K-MD with Flanges for any of the above listed chemicals. Chemical Resistance Chart

Summary Paragraph

March Pump’s industrial TE-7.5K-MD with Flanges is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and deionized water systems. It is capable of generating a maximum flow of 82 gallons per minute at 40 feet, and its maximum head is 85 Feet (37PSI). The standard wet end (the materials that come into contact with the solution) is composed of natural Kynar, Viton, Carbon, and Ceramic. The inlet connection is 2 inch ANSI Class 150 Flange, and the outlet is 1-1/2 inch ANSI Class 150 Flange. There are two standard motors. The first is a 1 Phase 60 hertz 115/208/230V and 50 hertz 100/200V 2 horsepower totally enclosed fan cooled motor. The second is a 3 Phase 50/60 hertz 208/230/460V and 50 hertz 190/380V 2 horsepower totally enclosed fan cooled motor. There are performance differences between the hertz options. The maximum internal pressure the pump can tolerate is 60PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-7.5K-MD wtih Flanges centrifugal magnetic drive pump is capable of handling mildly, or highly corrosive chemicals, acids, and solvents. To determine if the March TE-7.5K-MD with Flanges is suitable for your application, please contact March Pump.

 


MARCH Pumpen GmbH & Co. KG
Rathenaustrasse 2, 35394 Gießen

 +49 (0) 641 / 68 68 06 – 0
 +49 (0) 641 / 68 68 06 – 60
 info(at)march-pumpen.com