Centrifugal Pump made of Stainless Steel EUROLINE M10.2

For a larger view click on the thumbnail

Normal suction, magnetic drive, leak-free chemical centrifugal pump made of stainless steel in close coupled block design, according to CE regulations,
also compliant with ATEX 2014/34/EU or FDA.

MARCH magnetically driven centrifugal chemical pumps operate entirely without mechanical shaft sealing. The power is transmitted to the hydraulic part by a force-locking connection using powerful permanent magnets, without physical contact. MARCH magnetically driven centrifugal chemical pumps meet maximum requirements in terms of quality, economy and reliability when pumping aggressive, toxic and environmentally hazardous liquids.

Features

Centrifugal Pump
Closed Impeller, capsulated
Leak-free
Magnetic driven
NdFeB or CoSm permanent magnets
Closed coupled
Normal suction
Maintenance free
Only a few wear parts
Pump execution acc. to Ex II2G cbk T3-5

TECHNICAL DATA FOR THE STANDARD VERSION

Performance data

Flow rate:	max. 12 m³/h
Discharge head:	max. 11 mWs

Temperatures

AISI 316L:	max. 200°C

Available materials

Housing:	AISI 316L
Impeller:	CF8M
Pump shaft:	SiC or AISI316L
Sleeve bearing:	Carbon graphite or PTFEG
O-Ring:	EPDM, Viton, FEP

System pressure

AISI 316L:	norm. 10 bar
Higher pressure ratings upon request

Connection on suction side

Thread G 1 1/2“ (f)
Flange DN 40

Connection on discharge side

Thread G 1" (m)
Flange DN 25

Motor

IEC AC or three-phase motor
3x230/400 V, 50 Hz
1100 Watt, 2900 1/min